How to use sticky mats

1. Prepare the site

Clean and dry the area where the mat is to be placed. (Entryway, walkway, or heavy traffic area where foot-borne and wheel-borne contamination is to be controlled.)

2. Remove Protective Film From Bottom of Mat.

Top of mat you will be looking at the #30. Flip over

Pull the white tab and remove the protective film from the bottom of the mat. Do not pull off the sheet marked #1. If you pull off the #1 sheet the mat will not adhere to the floor.

3. Adhere Mat to Floor

Press one corner of the mat to the floor and slowly smooth out the mat until it is completely adhered to the floor. Walk on top of it (with the protective non-adhesive top layer still in place) to firmly press entire mat down.

4. Peel off the top protective sheet. The mat is now ready for use.

The specially formulated non-transferring adhesive will capture the dirt and dust from anything that moves across the mat’s surface.

5. Watch for particulate build-up!

When the top layer is visibly dirty remove it by pulling the uppermost corner tab and peeling off the dirty sheet.

Order Sticky Mats Today

How to add a replacement pad to framed sticky mats

1. Prepare the frame

Clean and dry the top of the frame. (Entryway, walkway, or heavy traffic area where foot-borne and wheel-borne contamination is to be controlled.)

2. Remove Backing From Bottom of Replacement Pad.

The tab with the #30 or #60 is the top of the mat.

Flip the pad over and pull protective film from the bottom of the mat. Be careful not to pull off the tab marked #1. If you pull off the #1 sheet the replacement mat will not adhere to the frame.

3. Adhere Replacement Mat to Frame

Press one corner of the mat to the frame and slowly smooth out the mat until it is completely adhered to the frame. Put mat on floor and walk on top of it (with the protective non-adhesive top layer still in place) to firmly press entire mat down.

4. Peel off the top protective sheet. The framed sticky mat is now ready for use.

Now place the framed mat where it is needed. A framed sticky mat is designed to be used on carpeted, hard to stick surfaces. The non-transferring adhesive will capture the dirt and dust from anything that moves across the mat’s surface.

5. Remove top layer after heavy use.

When the top layer no longer sticks or is fully used remove it by pulling the uppermost corner tab and peeling off the dirty sheet.

Order Framed Sticky Mats Today